Floor Squeegee Foam ― Aluminium Frame with Black EVA Foam Blade

This heavy-duty flfloor squeegee is built for real working flfloors, not light housekeeping. The blade is a dense black EVA foamstrip, clamped between an aluminium bar and the frame with galvanised bolts along its full length. Behind the blade sits aone-piece T-shape metal bracket that ends in a threaded socket, so the head screws onto a standard cleaning pole and lockswith a side screw.

Because the foam edge stays flflat against the flfloor, one straight pull moves standing water, slurry and fifine dust in a single passinstead of pushing it around. There is no rubber lip to curl, no plastic clip to snap, and the blade itself is replaceable ― unboltit, fifit a new strip, and the frame keeps working.

We are a direct factory, and every head can be made to your width and packaging requirement. Free samples are availablebefore bulk orders.

Built to Last ― Every Detail Checked

EVA foam blade. The strip is dense closed-cell EVA with a clean, straight cut edge. It stays flflexible enough to follow a flfloor thatis not perfectly level, yet fifirm enough to hold a line under pressure.

Bolted aluminium bar. Instead of glue or clips, the blade is clamped between the aluminium bar and the frame withgalvanised bolts placed along its entire length. That means even pressure from end to end, no lifting corners, and no bladeslipping out mid-shift.

T-shape bracket. The bracket is one piece of formed metal. It spreads the force from the pole across the middle of the frame,so the head does not flflex or twist when you lean into a long pull.

Threaded socket. The socket takes a standard threaded pole and a side screw locks it in place, so the head will not spin looseduring use.

Nothing here is glued shut. When the foam fifinally wears down, you unbolt the bar, fifit a new strip, and put the same frame backto work.

Ready in Seconds ― Simple Assembly, Flat Shipping

Assembly takes three steps. Screw a standard threaded handle into the socket. Tighten the side locking screw so the headcannot wobble. Then pull the squeegee toward you in one straight, steady pass.

A few tips from our customers: keep the blade flflat rather than tilted, work from the far corner back toward the drain, andoverlap each pass by a few centimetres so you do not leave a wet line between strokes. For heavy slurry, one slow pass clearsmore than several fast ones.

Because the head ships separately from the pole, it packs flflat. That lowers carton volume and shipping cost, and it lets youorder replacement heads without paying to ship poles again. Please note the pole is not included unless you specififically order it.

This squeegee is made for hard, relatively smooth surfaces ― concrete, tile, epoxy-coated flfloors and similar. Typical usersinclude:

Warehouses and distribution centres ― clearing wash water and dust from wide aisles

Garages and car parks ― moving rain runoffff, oil-water mix and grit toward the drain

Workshops and production flfloors ― daily end-of-shift cleaning

Car wash bays ― pushing standing water out fast between vehicles

Kitchens and food processing plants ― drying flfloors quickly after washdown to reduce slip risk

Balconies, patios and outdoor terraces ― clearing rain and cleaning water

It works wet or dry: use it to move water after a washdown, or to sweep loose dust and debris into a pile before collecting. Onrough or heavily textured surfaces a foam blade will wear faster, so tell us your flfloor type and we will advise the right blade specifification.

Changzhou Dengyue Polymer Group has been manufacturing polymer foam products since 2008. Our core business is foam forconstruction and cleaning applications, which means the blade on this squeegee is made in-house rather than bought in ― wecontrol the foam density, the cut and the fifinish.

We offffer one-stop supply across foam sheets, strips, gaskets and fifinished cleaning tools, so buyers who need several foamitems can consolidate them into one order and one shipment.

Compliance: our products are covered by RoHS and REACH, and our factory is BSCI audited.

What you get working with us:

Free sample ― check the foam density and build quality before you commit to a bulk order

OEM & ODM ― custom width, foam thickness, frame and carton to your drawing or sample

Direct factory ― no trading margin, and a direct line to the people who actually make the product

Send us the width and quantity you need, and we will come back with a quotation within one working day.